Newsletter topics of 2023:Spicer Aftermarket EMEA Newsletter 01/202303/02/2023
 |
|
Aftermarket EMEA
Europe, Middle East and Africa
Newsletter 01/2023 |
|
| | |  |  |
 |
Victoria Video for the Ultimate Off-road Application: Ultimate Dana 44™ and 60™ Axles for the Jeep Wrangler
The connection is almost legendary: Dana has been supplying axles for all models of Jeeps since 1941. It all started with the Willys MB, the original off-road passenger vehicle, developed for the U.S. Armed Forces in World War II.
The Dana brand Spicer® offers solid performance axles and prop shafts for off-road use for today’s successor models, the Jeep Wrangler JK, JL and Gladiator JT: the Ultimate Dana 44™ front axle and the Ultimate Dana 60™ front and rear axle. These upgrades are configured for maximum all-wheel performance under extreme terrain conditions.
Installation Tutorial for the Ultimate Dana 60™ Axle
Known for her Victor Reinz® tutorials, mechatronics technician Victoria shows how to tune a Jeep Wrangler JL with Ultimate Dana 60™ axles in a new training video made by Spicer. Aside from the front and rear axles, she also shows how to replace the prop shafts, shock absorbers and springs.
The Ultimate Dana 44™ and Ultimate Dana 60™ axles are both direct bolt-in solutions for a genuine OE factory-grade fit. The high-performance axles also provide maximum strength and durability for vehicles with large tires and high ground clearance. The full-float design means that the weight of the vehicle is supported not by the shaft, but by the housing, yielding much greater load-bearing capacity.
The Ultimate Dana 60™ axle is the absolute non plus ultra for the Jeep Wrangler for ambitious off-roaders and professionals. Slopes, tilts, twists, rocks, sand or mud: the Jeep is unsurpassed for any off-road challenge with these American-made axles.
Dana sells many thousands of Ultimate Dana 44™- and Ultimate Dana 60™ axles to off-road enthusiasts each year. Replacing the axles theoretically shouldn’t be a problem for an experienced fitter, but Dana still recommends going to a specialist shop for off-road tuning.
The training video on installing the Ultimate Dana 60™ axle – as well as all other Spicer brand video tutorials – is free to access at the Spicer Video Center: www.SpicerNews.com/victoria
The full Spicer performance range from Dana Aftermarket for the Jeep Wrangler JK, JL and Gladiator JT is available for download here: https://media.spicerparts.com/cfs/files/media/
jxnuhwCDwuZa2rSLG/DAG-JK-JL-JT-PRODBRO-0321.pdf
|
|
 |
 |
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
|  |
|
| | |
Newsletter topics of 2022:Spicer Aftermarket EMEA Newsletter 02/202214/12/2022
|
|
Aftermarket EMEA
Europe, Middle East and Africa
Newsletter 02/2022 |
|
| | | | |
|
Dana Introduces Spicer® ReadyShaftTM Program to European Region: Commercial Vehicle and Off-Highway
GYŐR, Hungary – Dana Incorporated announced today that its Spicer® ReadyShaftTM Program, aimed at driving commercial and off-highway vehicle uptime by providing next-day pickup of individually packed, ready-to-install Spicer driveshafts, will now be available in the Europe, Middle East, and Africa (EMEA) region. This launch expands the program first introduced in 2021 in North America, further increasing the accessibility to these premium-quality, genuine Spicer parts.
|
|
 |
Thanks for Reconnecting: Dana @ Automechanika Dubai from November 22-24, 2022
Automechanika is the largest international trade show for the automotive aftermarket industry in the wider Middle East region. For its 19th edition, Automechanika Dubai 2022 brought together 1000+ exhibitors from 58+ countries, and 21 official country pavilions to re-connect.
Victor Reinz® presented its universal sealing compound, REINZOSIL, in cartridge form for the first time in Middle East. In addition to its premium sealing products, the company displayed its Tru-Cool® thermal solutions and Spicer® drivetrain parts. |
|
 |
Welcome back at the Parts & Service World 2022 in Kassel, Germany from November 25-27, 2022
The Parts & Service World is an exclusive trade fair congress for different sectors:
- Agricultural and construction machinery
- Garden and forestry technology
- Workshop equipment, hydraulics and industry
Our drivetrain and sealing experts were happy to meet you at stand A112. |
|
 |
Spicer in Győr Extends Product Portfolio with REINZOSIL
Due to the high demand for sealants for Commercial and Off-Highway Vehicles, REINZOSIL will be available in two variants from the 4th quarter of 2022, at Spicer in Győr, Hungary. Thus, the REINZOSIL Tube and Cartridge will be provided to a broader group of customers.
|
|
 |
Updates on LinkedIn Page for the Spicer® Brand in Aftermarket
Dana will be presenting its drivetrain products on its own channel on LinkedIn. Follow us on LinkedIn and get the latest news from Spicer®.
|
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket EMEA Newsletter 01/202201/09/2022
|
|
Aftermarket EMEA
Europe, Middle East and Africa
Newsletter 01/2022 |
|
| | | | |
|
Pit Stop in Frankfurt: Dana Displays Victor Reinz®, Spicer®, and Glaser® Products Together at Automechanika 2022
Dana’s aftermarket range will be making a pit stop at the Automechanika in Frankfurt am Main from September 13 to 17, 2022. The focus will be on the Victor Reinz®, Spicer® and Glaser® brands. 240 m2 in area, Stand G91 in Hall 3.0 is set up like a pit lane with three pits.
Visit us in Hall 3.0, Stand G91.
|
|
 |
Spicer Announces ReadyShaft™ Program for One Day Delivery across Europe
The ReadyShaft™ Program from driveshaft specialist Spicer provides complete driveshafts assemblies from its commercial and off-highway vehicle portfolio ready to be installed within 24 hours.
|
|
 |
Dana Enhances Accessibility and Branding of Graziano Shifting Solutions Products
To better serve its customers, starting on Oct. 1, 2022, Dana is transitioning the distribution for its industry leading synchronizers from its plant in Rivoli, Italy to its distribution center in Győr, Hungary. The facility in Győr will be stocked with a large inventory so that most of Dana Graziano synchronizers are readily available to meet customer needs.
As part of the transition, a wide breadth of Dana’s synchronizer portfolio will be conveniently available to order at DanaAftermarket.com, broadening the reach of its current customer base.
|
|
 |
Dana Increases Customer Service Presence with two additional Service Centers
To further develop customer service, Dana has recently increased service center coverage. The two certified sites are located in Bosnia-Herzegovina and Israel.
|
|
 |
Spicer in Győr Extends Product Portfolio with REINZOSIL
Due to the high demand for sealants for Commercial and Off-Highway Vehicles, REINZOSIL will be available in two variants from the 4th quarter of 2022, at Spicer in Győr, Hungary. Thus, the REINZOSIL Tube and Cartridge will be provided to a broader group of customers.
|
|
|
Dana will be Exhibiting at Bauma Munich
From October 24-30, Dana will be exhibiting its latest drive and motion innovations for conventional and new-energy vehicles. Bauma is the world’s leading trade fair for construction and mining industries. They offer the international industry a common platform for profitable innovations, cross-border exchange and far-reaching perspectives.
Make plans now to visit us in hall A3, stand 326 to see our latest drive and motion innovations for conventional and new-energy vehicles.
Visit us in Hall A3, Stand 326
|
|
 |
Dana Announces LinkedIn Page for the Spicer® Brand in Aftermarket
Dana will now be presenting its drivetrain products on its own channel on LinkedIn. Follow us on LinkedIn and get the latest news from Spicer®.
|
|
|
Another successful Automechanika Johannesburg
Great interest was shown by many and we had many informative customer discussions over Spicer® and Victor Reinz® respectively. Thank you for joining us at our booth at the Automechanika Johannesburg, it was a pleasure meeting you.
The Intrade Team is looking forward to see you at the next Automechanika Johannesburg!
|
|
 |
Dana Presents Center Bearings for Mercedes-Benz Sprinter
Responding to customer demand for its high-quality aftermarket parts, Dana has launched two new center bearing kits for the Mercedes-Benz Sprinter which are produced to original-equipment (OE) standards – with applications in the highly-popular transport vehicle.
|
|
 |
Spicer® Features Mercedes Benz Sprinter
Dana’s Aftermarket Group developed its Spicer® original driveshaft product range to include the Mercedes Benz Sprinter light commercial vehicle series. Spicer original driveshafts for the Sprinter are available for over 80% of the existing vehicle range.
|
|
 |
Propshaft Quality Tubing
We are pleased to bring to you our revised and improved quality approved driveshaft tubing range.
All tubing are priced per meter, sold and shipped in multiples of full bar lengths*.
A cutting service is available for a small charge if required.**
|
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter topics of 2021:Spicer Aftermarket Europe Newsletter 02/202117/11/2021
|
|
Aftermarket Europe
Newsletter 02/2021 |
|
| | | | |
|
Original parts only: Video Tutorial on Exchanging an Intermediate Shaft Bearing on the Sprinter
No original spare part for the Mercedes-Benz Sprinter is subjected to such a demand as the intermediate shaft bearing for the prop shaft. This is due to the extremely high strain in the daily delivery mode. In Germany alone courier services have delivered more than 13 million courier, express and parcel shipments a day in 2020. That totals over four billion parcels (source; BIEK).
With the improved Spicer center bearing, customers will be able to replace OE parts at a lower cost. The new center bearings for the Sprinter are available and in stock for our customers.
|
|
 |
Did you miss Victoria’s Spicer Video - How to replace a Center Bearing Assembly?
Victoria is not only an expert in replacing all kind of automotive gaskets. The current video shows how to disassemble a commercial vehicle driveshaft and replace the center bearing assembly.
|
|
 |
Dana to Showcase Array of Drivetrain and Sealing Products at Automechanika Dubai
Dana will display its comprehensive portfolio of Spicer® Drivetrain Products at Automechanika Dubai, the largest international trade show in the region for the automotive aftermarket, which takes place December 14-16, 2021.
Visit us! Hall 3, Booth C24.
|
|
 |
Jeep Club for an outing at the John Rock 4X4 trail in South Africa
Nestled between the Magalies Mountains, and a stone’s throw from Hartbeespoort dam lies John Rock 4X4 trail. There are three courses on this farm.
The first is man-made obstacles that can become tricky but suitable for both standard and modified Jeeps alike called “Die Slote”.
The second one is formed by mother nature herself and remains untouched by human hands. This is called the Eco Mountain Trail. On the drive up the Magaliesberg mountains the beautiful views of the Hartbeespoort Dam and neighbouring areas can be seen. There are wild Impala and Blesbok that can be seen on this part of the trail.
A great time was had by all while educating some of the Jeep Club on the Spicer offering.
A great experience with Spicer®!
|
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | | Spicer Aftermarket Europe Newsletter 01/202113/04/2021
 |
|
Aftermarket Europe
Newsletter 01/2021 |
|
| | | |  |
 |
Victoria's Practical Tips: Spicer Edition -
How to replace a Center Bearing Assembly
Victoria is not only an expert in replacing all kind of automotive gaskets. The current video shows how to disassemble a commercial vehicle driveshaft and replace the center bearing assembly.
|
|
 |
Did
you miss Victoria’s first Spicer Video?
Get linked to our social media channel on YouTube and watch how to install or replace a driveshaft.
|
|
 |
Dana
Turns to Laser Markings for Enhanced Brand Visibility
In March 2021, Dana will begin laser marking its Spicer® brand onto its machined parts to enhance brand visibility and recognition while also improving the consistency of how the Spicer name appears across its products.
|
|
 |
Spicer ReadyPack™ and
Spicer Wing in a Box Kits
Spicer ReadyPack™ preassembled kits for driveshafts, coupling shafts, and interaxle shafts support the efficiency of your business with streamlined ordering, and savings on inventory, labor, and your total investment.
The Spicer ReadyPack kit arrives with u-joints that are professionally installed in the yoke shaft and in the tube yoke.
|
|
 |
Dana Brings its Reliable Spicer® Compact™ Series Plus Driveshafts to the Aftermarket
Leveraging its extensive expertise in driveshaft
design, Dana introduces its Spicer® Compact™ Series Plus driveshafts to the aftermarket worldwide. Spicer Compact Series Plus driveshafts are the world’s lightest steel driveshafts in their class, helping original-equipment manufacturers meet efficiency standards.
|
  |
Tractors Featuring Dana Technologies Sweep All
Four Categories in “Tractor of the Year 2021”
Awards
Dana Incorporated announced that the company's advanced drive technologies are used on all four of the winners in the “Tractor of the Year 2021” awards competition.
|
|
 |
DanaAftermarket.com
Dana Aftermarket offers a streamlined e-commerce platform at DanaAftermarket.com that allows you to easily access genuine Spicer® parts information. Find more information about DanaAftermarket.com and its features.
|
|
 |
 |
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter topics of 2020:Spicer Aftermarket Europe Newsletter 01/202025/06/2020
|
|
Aftermarket Europe
Newsletter 01/2020 |
|
| | | | |
|
Victoria's Practical Tips: Spicer Edition - How to Install or Replace a Driveshaft
Expert Victoria explains everything about replacing Victor Reinz® gaskets in a series of installation videos. Now she is also active for Spicer® Drivetrain Products. The latest video shows how to disassemble and assemble a drive shaft for commercial vehicles.
|
|
 |
New Pricing for Scania U-Joints
Dana has once again enhanced its line of u-joints, this time for Scania truck owners. To best meet customer needs, Dana has put measures in place to improve its robust, heavy duty u-joints, which are designed, engineered, and manufactured to the highest performance and quality standards.
|
|
 |
Dana Center Bearings for Mercedes-Benz Sprinter also Suitable for Current Sprinter Model
Responding to customer demand for its high-quality aftermarket parts, Dana is offering two center bearing kits for the Mercedes-Benz Sprinter which are produced to original-equipment (OE) standards – with applications in the highly-popular vans. Spicer Material X-10012-00 and X-10013-00 are suitable for all past and current SPRINTER vehicles.
|
|
 |
Keep your Business Running!
Trust Spicer® Driveshafts!
|
|
 |
Dana Sponsors Dakar Rally Teams, Showcases Performance Excellence
For the third year in a row, Spicer® sponsored teams participating in the annual Dakar Rally, which was held in the Middle East for the first time. The sporting event is known as the world’s most difficult rally, covering more than 8,000 kilometers of desert across a span of 12 days.
The event took place before the Covid-19 pandemic started.
|
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter topics of 2019:Spicer Aftermarket Europe Newsletter 04/201903/12/2019
|
|
Aftermarket Europe
Newsletter 04/2019 |
|
| | | | |
|
Another successful Automechanika Johannesburg.
Great interest was shown by many and we had many informative customer discussions over Victor Reinz® and Spicer® respectively.
Thank you for joining us at our booth at the Automechanika Johannesburg it was a pleasure meeting you.
We look forward to seeing you at the next Automechanika Johannesburg! |
|
 |
A Breathtaking Show in Italy: Carrara Motor Show and 4x4FEST
The Carrara trade show, only event in Italy entirely dedicated to the world of four-wheel drive, ensured all fans a lot of fun October 14-16, 2019. For the first time, Spicer products have been showcased featuring a highly-durable Ultimate Dana crate axle with Spicer gearing. |
|
 |
Trusted Products for Jeep more than 75 Years
Newest Dana Performance Catalog for JEEP JK, JL and GLADIATOR JT!
Out Now!
|
|
 |
Ultimate Dana 60™ Axles Now Available Without Brackets, Designed to Fit Any Application
Dana Incorporated announced that it will be offering Ultimate Dana 60 Bracketless™ axles, which remove the mounting brackets, allowing for smoother installation into virtually any application. End users will now be able to add the proper mounting brackets they choose. The axles otherwise include all the features of the Ultimate Dana 60, including Spicer® performance ring and pinion gears, heavy-duty upgraded brakes, and massive SPL® 70 u-joints.
|
|
 |
Spicer® Performance Driveshafts: New coverage for Jeep® Wrangler JK with Ultimate Dana 60® Axles
Dana Aftermarket Group is pleased to announce the release of our new Spicer® 1350 Series Driveshafts for Wrangler JK with Ultimate Dana 60® Axle.
|
|
 |
New Performance Driveshafts for the Jeep Wrangler JL
The Dana Aftermarket Group is pleased to announce the availability of Spicer performance driveshafts for the Jeep Wrangler JL. These aftermarkets exclusive 1350 and 1310 series driveshafts are built for ultimate performance.
|
|
 |
Dana Introduces Center Bearings for Mercedes-Benz Sprinter - Available on stock!
Responding to customer demand for its high-quality aftermarket parts, Dana is launching two new center bearing kits for the Mercedes-Benz Sprinter which are produced to original-equipment (OE) standards – with applications in the highly-popular transport vehicle..
|
|
|
|
|
|
Dana Incorporated at Agritechnica Show in Hanover
Dana presented its latest innovations at Agritechnica 2019, the world's largest exhibition for the agriculture industry. The seven-day show held in Hanover, Germany, welcomed more than 450,000 visitors and 2,800 exhibitors. A highlight of the week was Dana's all-new drive systems for telehandlers that feature hybrid and electric drivetrain solutions. |
|  |
Advanced Drive Technologies from Dana Featured on All Four Winners of "Tractor of the Year 2020" Awards
Dana Incorporated announced that the company's advanced drive technologies are used on the winners in all four categories of the "Tractor of the Year 2020" awards competition.
The Spicer® 980 independent suspended axle is featured on the Fendt 942 Vario tractor, the winner in the premier "Tractor of the Year" category. Dana also supplies the front axle for the Fendt 314 Vario Profi+, which topped the "Best Utility" classification.
|
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201917/09/2019
|
|
Aftermarket Europe
Newsletter 03/2019 |
|
| | | | |
|
Visit us at Automechanika South Africa - Stand OD22 in the Outdoor Area!
This year Dana will do it a little differently and have an outdoor stand which will display its comprehensive portfolio of Victor Reinz® sealing products and Spicer® drivetrain parts at Automechanika Johannesburg, South Africa.
Automechanika is the largest international trade show in the region for the automotive aftermarket, which takes place from September 19 – 21, 2019.
|
|
 |
Dana Releases Two New Driveshafts for Volkswagen Amarok Drivers
Dana has unleashed two new powerful driveshafts for the Volkswagen Amarok as part of its Dana Aftermarket Performance Program, which focuses on the needs of performance racing and off-roading applications. Covering nearly one million vehicles in operation, these driveshafts are made to equip Amaroks on the road today dating back to model year 2013.
|
Dana Unveils Comprehensive List of Double Joint Knuckles
To make its Spicer® Double Joint Knuckles more accessible, Dana has compiled a comprehensive list of all its aftermarket Double Joint Knuckles offerings and part numbers for 587, COMPACT and WING Series. This new list gives customers a one-stop database to easily identify the makes and models that Dana covers with its market-leading joints.
|
 |
Dana Expands Toyota Coverage, Adds 25 Driveshafts to Catalog
After conducting a comprehensive make/model analysis to identify any gaps in coverage across the industry, Dana determined there was an opportunity to provide its products to a larger segment of customers by enhancing its Toyota offerings. With its findings in mind, Dana recently added 25 shafts to its Toyota aftermarket portfolio.
|
Mercedes Benz Sprinter Rubber Coupling Driveshafts
Dana’s Aftermarket Group will expand their Spicer® driveshaft product range for the Mercedes Benz Sprinter to include driveshafts with rubber coupling. Spicer® original driveshafts for the Sprinter will be available for over 80% of the existing vehicle range.
|
 |
Dana introduces new U-Joints for Meritor Series RPL20 and RPL25
Responding to customer demand for its high-quality aftermarket parts, Dana is launching two new U-Joints, produced to original-equipment (OE) standards, with applications in highly popular transport vehicles.
|
New Compact Series U-Joints with Greaser on Bearing Cup
The Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer Compact Series U-Joints with greaseable bearing cup.
These U-Joints will be available for all Compact Series and will be available with one, two or four greaseable bearing cups.
|
Dana Introduces Center Bearings for Mercedes-Benz Sprinter - Now on stock!
Responding to customer demand for its high-quality aftermarket parts, Dana is launching two new center bearing kits for the Mercedes-Benz Sprinter which are produced to original-equipment (OE) standards – with applications in the highly-popular transport vehicle..
|
|
DanaAftermarket.com - Real Time Commerce
DanaAftermarket.com is a real time e-commerce platform designed to help you compete at the speed of the internet.
|
 |
|
|
|
Dana’s Strategic Acquisitions
Over the past four years, Dana has completed nine strategic acquisitions to strengthen its supply chain and expand its product offering. Most significantly, Dana has completed:
|
|
|
- the acquisition of the power-transmission and fluid power businesses of Brevini;
- the acquisition of a majority stake in TM4, a manufacturer of high-voltage electric motors, power inverters, and control systems, which includes a majority stake in Prestolite E-Propulsion Systems (PEPS), now known as Dana Electric Motor Co. Ltd.;
- the purchase of the SME Group, a designer and manufacturer of low-voltage motors, inverters, and control systems, and;
- the acquisition of the Drive Systems segment of the Oerlikon Group, including a majority stake in Ashwoods Electric Motors, a designer and manufacturer of interior permanent magnet motors.
Combined with the company's core expertise in driveline technologies, sealing systems, thermal management, and digital offerings, these initiatives position Dana as a leading supplier of electrification solutions.
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201903/06/2019
|
|
Aftermarket Europe
Newsletter 02/2019 |
|
| | | | |
|
Dana to
Showcase Array of Sealing and Thermal-Management Products at Automechanika
Dubai
Dana will display its comprehensive portfolio
of Victor Reinz® sealing products at Automechanika Dubai, the
largest international trade show in the region for the automotive aftermarket,
which takes place June 10-12. In addition to its premium sealing products, the
company will exhibit its Tru-Cool® thermal solutions and Spicer®
drivetrain parts.
|
|
 |
Dana
Brings its Reliable Spicer® Compact™ Series Plus Driveshafts to the
Aftermarket
Leveraging its extensive expertise in
driveshaft
design, Dana introduces its Spicer® Compact™ Series Plus
driveshafts to the aftermarket worldwide. Spicer Compact Series Plus
driveshafts are the world’s lightest steel driveshafts in their class, helping
original-equipment manufacturers meet efficiency standards.
|
|
Dana
Introduces Spicer® Extreme™ U-Joints to the EMEA Region
Dana is taking its toughest u-joint design – its
Spicer® Extreme™ u-joints – global by introducing them to EMEA
(Europe, Middle East, Africa, and Russia) customers. Manufactured specifically
for off-road use, these u-joints deliver high performance for vigorous off-road
adventures and feature a SAE-4340 nickel chromoly steel cross for added
durability.
|
 |
Dana
Highlights Comprehensive Portfolio at Bauma 2019
This year, at the Bauma construction trade
show in Munich, Dana showcased its extensive portfolio of conventional and
electrified drive and motion technologies, giving attendees a good look at how
its solutions can enhance the productivity, efficiency,
and mobility of
vehicles.
|
 |
DanaAftermarket.com Replaces DanaMATE for
Spicer® Customers
In order to give Dana’s customers a more comprehensive, easy-to-use tool
for accessing Dana parts in real-time, the company has been transitioning
customers from DanaMATE to DanaAftermarket.com. Dana launched
DanaAftermarket.com in January 2017, with the intention of making it a robust,
one-stop e-commerce site, capable of addressing all aftermarket needs.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201918/03/2019
|
|
Aftermarket Europe
Newsletter 01/2019 |
|
| | | | |
|
Amazing
Spicer Jeep Performance in Africa
The Ultimate Dana 60TM
crate axle finally hits the South African shores. The build was initiated and
done by the Dana representatives in South Africa Intrade Motor Parts.
|
 |
 
Dana Delivers Strong Portfolio of Ford Ranger Parts
to the Aftermarket
With the addition of recently published Spicer® parts
to
DanaAftermarket.com, Dana is now equipped to provide aftermarket driveline
parts to approximately 70 percent of Ford Rangers in Europe and the U.S.
|
|
Spicer® Product Range Expansion: NK-Series
Dana Aftermarket Group Europe is pleased to announce
the expansion of our Driveshaft product range with the addition of full range
of products for Spicer NK Series 300, 400, 500 and 600. Even driveshafts are
available on demand out of our European Distribution Center in Györ.
|
 |
Dana
Introduces Center Bearings for
Mercedes-Benz Sprinter
Responding to customer demand for its
high-quality aftermarket parts, Dana is launching two new center bearing kits
for the Mercedes-Benz Sprinter which are produced to original-equipment (OE)
standards – with applications in the highly-popular transport vehicle.
|
 |
Dana Reintroduces Center Bearing Assemblies
for Additional Truck Models
Dana is continuing to reactivate production of its Spicer® center bearing assemblies with two more products, which have applications in trucks by major commercial vehicle manufacturers, such as Volvo, Renault Trucks, and Iveco.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter topics of 2018:Spicer Aftermarket Europe Newsletter 03/201810/12/2018
|
|
Aftermarket Europe
Newsletter 03/2018 |
|
| | | | |
|
Dana
Reintroduces Center Bearing Assemblies
for Additional Truck Models
Dana is continuing to reactivate production of
its Spicer® center bearing assemblies with two more products, which
have applications in trucks by major commercial vehicle manufacturers, such as
Volvo, Renault Trucks, and Iveco. While these vehicles are
no longer in serial
production, thousands of the trucks are still on roads today, and the company
recognized the need to bring its high-quality Spicer Center Bearing B-10011-00
and B-10012-00 series and related XS Midship Assemblies back to the
aftermarket.
|
 |
Dana
Enhances Customer Accessibility with Updated E-Commerce Platform
To help improve customers’ experience and
accessibility to Dana Aftermarket parts, Dana has launched an updated version
of its e-catalog and
e-commerce site, DanaAftermarket.com. The latest site now
includes enhanced part search ability of Spicer® and Victor
Reinz® parts for EMEA (Europe, Middle East, Africa) region customers. Additionally, all part models are now accessible to
customers in Gyor, Hungary. Site users can now search, locate, order, and track
a wider variety of
part models to fit individual product needs.
|
 |
Spicer® Product Range Expansion: Iveco
Dana Aftermarket Group Europe is pleased to announce the expansion of our Driveshaft product range with the addition of Spicer Iveco Daily Series for Light Commercial Vehicle applications in our European Distribution Center in Gyor.
|
Spicer® Features Mercedes Benz Sprinter
Dana’s Aftermarket Group will expand their
Spicer® original driveshaft product range
to include the Mercedes Benz Sprinter light
commercial vehicle series. Spicer® original
driveshafts for the Sprinter will be available
for over 80% of the existing vehicle range.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201805/09/2018
|
|
Aftermarket Europe
Newsletter 02/2018 |
|
| | | | |
|
Dana to Expand Aftermarket e-Commerce Platform for Customers in EMEA Region
Dana Incorporated announced that it is expanding its e-commerce platform, DanaAftermarket.com, to support customers in the European, Middle Eastern and African (EMEA) region. The company will feature the platform at Automechanika 2018, Sept. 11-15, in Hall 3 booth G91, alongside its broad range of drivetrain, sealing, and thermal-management solutions for the aftermarket.
|
 |
New
U-Joints and Center Bearings for Mercedes-Benz Sprinter
Responding to customer demand for its high-quality aftermarket parts, Dana is launching two new driveline products for the Mercedes-Benz Sprinter. The company introduces new Spicer® universal joints (u-joints) and center bearing assemblies – produced to original-equipment (OE) standards – with applications in the highly-popular transport vehicle.
|
 |
Spicer
to relaunch important Center Bearings for Commercial Vehicles:
Dana
Re-Enters Production of Center Bearing Assemblies for Medium-Duty Commercial
Vehicles with Brackets of 200mm Bolt Holes and 45mm Bearing
Dana has relaunched production of its Spicer® Center Bearing B-10013-00 series with applications in many trucks by popular commercial vehicle manufacturers, including IVECO S.p.A and MAN Truck & Bus AG.
|
 |
Dana Announces New Facebook Page for its Spicer® Drivetrain Products
Dana’s Spicer® product line recently began engaging with its audiences in Europe, Middle East and Africa (EMEA) in a new way—through Facebook.
|
 |
|
|
|
Dana OE
Supplier to Mercedes-Benz
Dana has entered serial production with Mercedes-Benz to supply these
driveshafts to the all-new sprinter van.
|
 |
Dana Italy Crescentino Reaches Manufacturing Milestone
The Dana Italy Crescentino team recently reached a manufacturing milestone, producing 500,000 double joint shafts. In addition to the wing style, round bearing, and centered double cardan shafts, Crescentino has also been producing double transmission joints on the steered wheels of construction and agricultural vehicles since 2014. This facility has become a market leader, covering almost the entire double joint requirements of Dana’s Off-Highway business and supplying our plants in Arco, Rovereto, and Como, Italy; Győr, Hungary; Wuxi, China; as well as Brazil and India.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201819/04/2018
|
|
Aftermarket Europe
Newsletter 01/2018 |
|
| | | | |
|
Dana Brings Dongfeng Dana Truck and Bus Axles to European Market
Dana is making its world-class axles produced by its joint venture with DongFeng Motor Co. Ltd. – the largest producer of trucks and buses in China – available to the EMEAR (Europe, Middle East, Africa, Russia) market. The DongFeng Dana Axle Co. (DDAC) Ltd. truck and bus axles and related components can be ordered from the Dana Aftermaket Distibution Center of Györ, Hungary.
|
 |
Technical Service Information
How to replace MANITOU Cardan Coupling
|
 |
Spicer® Product Range Expansion:
JCB range and complete shafts and components
The Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer JCB interchangeable driveshafts, for Off-Highway applications.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter topics of 2017:Spicer Aftermarket Europe Newsletter 04/201719/12/2017
|
|
Aftermarket Europe
Newsletter 04/2017 |
|
| | | | |
Spicer® Enhances Web Catalog with Product Images
The Spicer® brand is adding photos to product profiles to enhance its web catalog, beginning with the most popular items. The online catalog currently features approximately 5,000 product pictures, and the additions bring the total to nearly 30,000 images.
|
 |
Spicer® Lists Products with Mercedes-Benz Applications in Web Catalog
It is now possible for Spicer® customers to search its product offerings for Mercedes-Benz vehicles, as the brand is in the process of referencing those parts in its web catalog. So far, there are approximately 1,000 part numbers listed for Mercedes-Benz applications, and more are being added each day.
|
 |
|
|
|
Dana’s All-Wheel-Drive System Featured on International Van of the Year
Superior performance in comfort, smoothness and safety are among the key criteria in the annual judging process for the International Van of the Year. Dana’s all-wheel-drive (AWD) system with electronic differential lock helps enable the high-performance capabilities of the Volkswagen Crafter, which received this prestigious award for 2017.
|
 |
 |
Dana Showcases Powerful Combination of Drive and Motion Systems for Agriculture Vehicles at Agritechnica 2017
Dana is demonstrating the company's leading market position as a Tier-One supplier of drive and motion systems for the agriculture industry at Agritechnica 2017.
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201730/10/2017
|
|
Aftermarket Europe
Newsletter 03/2017 |
|
| | | | |
Dana Manufactures Spicer® Products for Award-Winning Jaguar Vehicles
The Spicer® brand produces original equipment parts specifically engineered for three award-winning Jaguar SUVs and cars. The precision driveline components are manufactured for Jaguar’s F-PACE, XE, and XF to assist in the vehicles’ superior performance.
|
 |
Dana Adds EvoBus and MAN Propshafts to Spicer® Web Catalog
The Spicer® brand makes the sales process convenient for customers by continually expanding the brand’s product portfolio, and having products accessible on its web catalog. Recently, Spicer® increased its web catalog’s product offerings by adding propshafts suitable for EvoBus and MAN applications. Thus far, an additional 750 propshafts were added to the catalog.
Spicer® is constantly working on improving its web catalog to improve functionality and increase the number of products available to customers. To view the new additions to the web catalog, visit
|
 |
Dana Aftermarket Showcased Spicer®, Victor Reinz® Brands at Automechanika Johannesburg 2017
|
 |
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201727/07/2017
|
|
Aftermarket Europe
Newsletter 02/2017 |
|
| | | | |
Dana’s Aftermarket Group is Expanding its Product Portfolio, Completing Driveshaft Product Range for Scania Commercial Vehicles
Dana’s Aftermarket Group is expanding its product portfolio for Scania commercial vehicles to feature a complete range of approximately 1,100 driveshafts. With the additions, original Spicer® driveshafts and driveshaft components will be available for every Scania model currently in production with a short lead time and service virtually all of Scania’s vehicle needs. The product line now covers the complete range of driveshafts including: Scania P300, P400, P420, P500, P520 and P600.
|
 |
Dana Expands Spicer® Web Catalog
The Spicer® web catalog provides members with access to the brand’s complete product portfolio of driveshafts for light vehicles, commercial vehicles,
and off-highway vehicles; axles; transmissions; crate axles; and more. The online catalog also includes detailed information on components and more than 250,000 searchable cross-references to competitor parts and corresponding Spicer® products.
|
 |
Dana Parts Showcased in Island Tour of
South Italy
Several Dana products were put to the test during the Island Tour 2017 that recently launched around the southern part of Italy.
The tour features a Dana-branded Jeep JK Rubicon outfitted with Ultimate Dana 60 axles, Spicer® driveshafts and Spicer® Performance Adjustable
Shock Absorbers by Walker Evans Racing.
This marks the first time a Jeep has been upgraded with the axles outside the U.S.
|
 |
Dana Aftermarket Showcases Spicer®,
Victor Reinz® Brands at Automechanika Johannesburg 2017
Dana will showcase a robust range of Spicer® and Victor Reinz® technologies, including a complete set
of driveline and sealing solutions for off-highway, commercial, and light vehicles during Automechanika Johannesburg 2017, Sept. 27-30.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201730/03/2017
|
|
Aftermarket Europe
Newsletter 01/2017 |
|
| | | | |
Dana To Bring Spicer® and Victor
Reinz®
Driveline and Sealing Products to 2017
Automechanika Show in
Istanbul April 6
through 9
Dana, a global leader in highly engineered
driveline, sealing, and
thermal management
technologies, is ready to bring a strong lineup
of its
products to the 2017 Automechanika
Istanbul trade show. The show, Turkey's
leading international trade fair
for the
automotive industry, will take place from April 6
through April 9 at
the TÜYAP Fair Convention
and Congress Center.
|
 |
Dana
Showcases Full Value of Integration
with Brevini at CONEXPO-CON/AGG
At
CONEXPO-CON/AGG, Dana Incorporated
debuted comprehensive offerings for the
global
construction, mining, and material-handling
industries that include
Spicer® drivetrain
solutions and newly acquired Brevini™
power-
transmission and fluid power solutions.
|
 |
Spicer® Product Range Expansion: Iveco
Dana Aftermarket Group Europe is pleased to announce the expansion of our Driveshaft product range with the addition of Spicer Iveco Daily Series for Light Commercial Vehicle applications in our European Distribution Center in Gyor.
|
Spicer® Features the Scania Driveshaft Range: P420 and P520
Dana’s Aftermarket Group is pleased to announce their Spicer® driveshaft line for commercial vehicle manufacturer Scania, which includes Scania’s P420 and P520 series, joining the list of Scania models for which Dana already supplies Spicer original driveshafts.
|  |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter topics of 2016:Spicer Aftermarket Europe Newsletter 04/201624/11/2016
|
|
Aftermarket Europe
Newsletter 04/2016 |
|
| | | | |
Dana to Purchase Power-Transmission,
Fluid Power Businesses of Brevini
Group
The
acquisition will immediately expand Dana’s
product portfolio with adjacent
technologies and
establish Dana as the only solutions provider that
can manage
power conveyance to move the
vehicle and perform the work of the vehicle.
|
 |
Dana Aftermarket
Delights Customers with
New Products, Online Catalog and Hospitality
at
Automechanika Frankfurt
Guests
visiting Dana’s exhibitor booth at this year’s Automechanika Frankfurt show
were introduced to many new premium aftermarket technologies for
light,
commercial, and off-highway vehicles, demonstrations of Dana’s new online
catalogs,
and more. In addition, visitors were treated to
Dana’s signature
hospitality, with delicacies served
at the nightly tapas bar hosted in Dana’s
booth.
|
 |
Spicer® Ultra-Premium
Synthetic Grease
for Ultimate Performance
Trust Spicer Life Series® to deliver
excellent load-carrying ability, wear resistance and
protection against
corrosion in your automotive,
commercial, off-highway, and high-performance
applications.
|
 |
Dana Launches New Website to Support Aftermarket in Middle East,
Africa, and Russia
Dana
Incorporated announced the launch of an
all-new, state-of-the-art Spicer parts
website
dedicated to providing a wealth of information to
much of its global
market, including Europe,
the Middle East, Africa, and Russia. The new site,
www.SpicerParts.com, provides relevant information
for the entire range of
Spicer parts customers,
from dealers and distributors to end users and
automotive enthusiasts.
|
 |
Spicer® Features the Complete Scania Driveshaft
Range:
P300, P400, P420, P500, P520, P600
Dana’s Aftermarket Group is pleased to announce
the
expansion of their Spicer® driveshaft line for
commercial vehicle
manufacturer Scania, which
includes Scania’s P300, P400, P420, P500,
P520 and
P600 series,
joining the list of Scania
models for which Dana already supplies Spicer
original driveshafts.
Dana also has a long history of supplying
Spicer driveshafts for Scania as an original
equipment manufacturer.
|
|
Spicer® Features Mercedes Benz Sprinter
Dana’s Aftermarket Group will expand their
Spicer® original driveshaft product range
to include the Mercedes Benz Sprinter light
commercial vehicle series. Spicer® original
driveshafts for the Sprinter will be available
for over 80% of the existing vehicle range.
|
 |
Spicer Driveshafts for the Light Vehicle Market: Toyota, Nissan, Mercedes Benz, Suzuki
Spicer quality light vehicle OE driveshafts and driveshaft components for passenger cars
and light trucks are engineered for performance,
safety, reduced weight and minimized noise
and vibration.
In addition to complete driveshafts, Dana also
offers original Spicer driveshaft components for
the light-vehicle market, including premium Spicer
Life Series® universal joints, which use Dana’s
highest quality, triple-lip seal and external seal
guard to resist the harshest conditions.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201621/07/2016
|
|
Aftermarket Europe
Newsletter 03/2016 |
|
| |
| | |
Dana Spicer®
Parts Now Available on TecDoc
Dana Aftermarket Group is pleased to announce Spicer® parts
are now available on TecDoc, offering global customers the opportunity to view
and order Dana’s trusted parts from the TecDoc database.
|
 |
Dana Spicer® Expands
its Driveshaft Product Range for Scania Trucks, and Adds Mercedes Benz Sprinter
Dana’s Aftermarket Group is pleased to announce the
expansion of their Spicer® original driveshaft product range to
additional Scania commercial vehicle models, and for the Mercedes Benz
Sprinter. All products will be available
through Dana’s European Distribution Center in Győr, Hungary.
Every
genuine Spicer driveshaft is designed and manufactured to the highest quality original-equipment
specifications and standards, and
engineered for peak performance, reliability, and durability. Spicer driveshafts and driveshaft components provide
a robust, cost-effective, lighter-weight, virtually maintenance-free solution.
With Spicer, you can
trust that you are getting the same highest standards of quality and
performance expected from original equipment manufacturers – because Spicer is THE
original-equipment manufacturer.
As
the global leaders in driveline technology, Dana
combines the legacy and reputation of Dana with the innovation and value of its
Spicer products, delivering superior solutions that are driving the aftermarket
industry.
Read more about Dana’s Spicer driveshafts and driveshaft components for Scania
and for the Mercedes Benz Sprinter. |
Spicer® Features Scania P400, P500 and
P600 Models
Beginning this August, Dana’s Aftermarket Group
is pleased to announce the expansion of their Spicer® driveshaft
line for commercial vehicle manufacturer Scania, which will include Scania’s
P400, P500 and P600 series, joining the list of Scania models for
which Dana
already supplies Spicer original driveshafts. Dana also has a long history of
supplying Spicer driveshafts for Scania as an original equipment manufacturer.
|
|
Spicer® Features Mercedes Benz Sprinter
Starting in August,
2016, Dana’s Aftermarket Group
will expand their Spicer® original driveshaft
product
range to include the Mercedes Benz Sprinter light
commercial vehicle
series. Spicer® original driveshafts
for the Sprinter will be available for over 80% of the existing vehicle range.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201604/05/2016
|
|
Aftermarket Europe
Newsletter 02/2016 |
|
| |
| | |
Now
Available: Dana Spicer® Product Kits, Complete With Torque
Instructions
Dana Aftermarket Group is now offering Spicer®
product kits, providing a complete set of Spicer off-highway solutions to
global customers. Each kit includes all approved fitting hardware, including
Spicer® Wing Series® u-joints and bolts, and allows
customers a simplified, direct method of receiving necessary parts, while
ensuring total product compatibility. The kits also include comprehensive
torque instructions, which detail the approved torque fitting requirements and
installation guidelines for each product. By removing the need for separate
part orders, the process for ordering and installing Spicer products is
streamlined.
Customers are encouraged
to contact their sales account managers with any questions and for more
information on how to align their ordering practices to include the new Spicer
product kits.
|
FENDT 1050 Vario - Amazing Tractor with Great Design
Fendt 1000 Vario series is a completely new range high-horsepower tractors from the Fendt brand. With new engines from 380 – 500 hp, it has been specially designed as a powerful draft tractor for the global market.
For these open field tractors up to 372.9 kW (500 hp), the Spicer 990 axle offers high power and torque to improve both productivity and comfort.
|
Spicer® Product Range Expansion: Iveco
Effective from March, the Dana Aftermarket Group Europe is pleased to announce the expansion of our Driveshaft product range with the addition of Spicer Iveco Daily Series for Light Commercial Vehicle applications in our European Distribution Center in Gyor.
|
Dana Propshafts Propel Hino Motors to
Victory at Annual Dakar Rally
The Dakar Rally is an annual rally race open to
amateur and professional entries. This off-road
endurance race brings competitors to
traverse tough terrain. Most of the competitive
special sections are off-road, crossing dunes,
mud, camel grass, rocks, and more.
On Jan., the final stage of the two-week Dakar Rally completed, with the Hino Motors team finishing first
and second, winning the championship for
seven years running! Hino uses Dana base-design Compact 2035 and 2040 propshafts, which are assembled in Japan by our JV, Najico Spicer.
Dana is proud to provide Compact Series driveshafts to help propel Hino to victory and congratulates them on the great accomplishment. |
 |
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201630/03/2016
|
|
Aftermarket Europe
Newsletter 01/2016 |
|
| | | | |
Spicer®
Parts Will Soon Be Available Via TecDoc
Dana Aftermarket Group will soon be offering
Spicer® parts on TecDoc, an online parts catalog
available to
aftermarket customers throughout
the world.
|
|
Spicer® Product Range
Expansion: Iveco
Effective from March, the Dana Aftermarket Group
Europe is pleased to announce the expansion of our Driveshaft product range
with the addition of Spicer Iveco Daily Series for Light Commercial Vehicle
applications in our European Distribution Center in Gyor.
|
Dana Spicer®
Service Parts Information Will
Soon Be Available for Download
In response to growing customer needs, the
complete portfolio of Spicer®
off-highway service
parts product sheets will now be available for
download using the Spicer online catalog.
To view or download the
complete Spicer online
catalog, visit www.spicerparts.com/online-catalog.
|
|
Dana
Aftermarket finds success with Saudi Arabian market at Automechanika Jeddah
2016
Dana Holding Corporation recently enhanced its
commitment to participating in leading aftermarket
events by exhibiting at the
inaugural Automechanika
Jeddah 2016. With its extensive product portfolio
on-site, Dana was able to educate attendees on
the breadth of its premium
aftermarket Spicer® and
Victor Reinz® technologies,
including driveline and
sealing solutions for light, commercial, and
off-highway vehicles.
|
 |
Survey
We would like to learn more about your favorite
magazines.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Newsletter archive:
Commercial / Light Vehicle:
Driveshaft
Off-Highway:
Axle and Transmission
Commercial / Light Vehicle:
Driveshaft Off-Highway:
Axle and Transmission
Spicer Aftermarket Europe Newsletter 04/201509/12/2015
 |
|
Aftermarket Europe
Newsletter 04/2015 |
|
| | | | |
Dana Aftermarket featuring
Spicer®, Victor Reinz® solutions at Automechanika
Jeddah 2016
Dana is showcasing its
Spicer® and Victor Reinz® aftermarket products at the
inaugural Automechanika Jeddah 2016, the latest automotive trade show in
Saudi Arabia. To extend its technology reach and develop stronger
customer relationships in the Middle Eastern market, Dana will be
exhibiting a range of innovative Spicer® and Victor
Reinz® technologies, including driveline and sealing solutions
for off-highway, commercial, and light vehicles.
|
|
Manitou Vibration Dampening Driveshaft’s
For
Telehandlers
Spicer® is pleased to launch an interchangeable
shaft
solution for Mantiou machinery. All materials
are equal to OEM performance.
|
 |
Spicer® Product Range Expansion:
Mercedes – Light Vehicle ML
Effective from January 2015, the Dana Aftermarket
Group Europe is pleased to announce the expansion
of our Driveshaft product range with the addition of
Spicer Mercedes ML Vito Series for Light Vehicle
Applications in our European Distribution Center
in Györ.
|
 |
Spicer® Product Range Expansion: NK-Series
Effective from December 2014, the Dana Aftermarket Group Europe is pleased to announce the expansion of our Driveshaft product range with the addition of Spicer NK Series 300, 400 and 500 by Spicer
Nordiska Kardan for Commercial Vehicle Applications
in our European Distribution Center in Györ.
|
 |
Dana expands its Spicer® Technology Line:
Volvo Interaxle Range
The Dana Aftermarket Group Europe will add new Spicer® driveshafts to its growing product collection for Commercial Vehicle - Volvo Interaxles applications. These technologies will be available starting in March through our European distribution center in Györ.
|
Spicer® Product Range Expansion:
JCB range and complete shafts and components
Effective from July, the Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer JCB interchangeable driveshafts, for Off-Highway applications
|
Propshaft Quality Tubing
Since we launched our tubing supply at the start of the year, we have analysed the performance so far, In order to improve the accuracy of invoicing the standard bar length has been changed from 6 meters to be 5.8 meters as all tubing is now be priced per meter, sold and shipped in multiples of full bar lengths (@ 5.8 meters*) the unit price you pay remains the same.
A cutting service is still available for a small charge if required.**
All tubing (subject to availability) will normally be available for shipment 2 to 3 weeks after receipt of order, tubing will be dispatched from our Györ distribution centre so can be consolidated with any other materials being shipped at the same time, thus avoiding additional transportation charges wherever possible.
*Standard bar lengths may vary ± 10% will be charged as 5.8 x 1 meter
**A bar length may be cut only 1 or 2 times so we can ship in approximately 2 meter or 3 meter lengths, all tube still have to be ordered in multiples of 5.8 meters
Please talk to your account manager for further information and pricing
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201504/08/2015
|
|
Aftermarket Europe
Newsletter 03/2015 |
|
| | | | |
Spicer® Product Range Expansion:
JCB range and complete shafts and components
Effective from July, the Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer JCB interchangeable driveshafts, for Off-Highway applications
|
Driveshaft Components Failure Analysis Guide
Component failures can result from improper maintenance, installation, or assembly procedures. This quick reference poster assists service technicians in recognizing some possible component failures. The poster is available at www.spicershop.com.
|
 |
Propshaft Quality Tubing
Since we launched our tubing supply at the start of the year, we have analysed the performance so far, In order to improve the accuracy of invoicing the standard bar length has been changed from 6 meters to be 5.8 meters as all tubing is now be priced per meter, sold and shipped in multiples of full bar lengths (@ 5.8 meters*) the unit price you pay remains the same.
A cutting service is still available for a small charge if required.**
All tubing (subject to availability) will normally be available for shipment 2 to 3 weeks after receipt of order, tubing will be dispatched from our Györ distribution centre so can be consolidated with any other materials being shipped at the same time, thus avoiding additional transportation charges wherever possible.
*Standard bar lengths may vary ± 10% will be charged as 5.8 x 1 meter
**A bar length may be cut only 1 or 2 times so we can ship in approximately 2 meter or 3 meter lengths, all tube still have to be ordered in multiples of 5.8 meters
Please talk to your account manager for further information and pricing
|
Customer Web Portal Access to Gyor DC
This can be available now to all customers, please contact your account manager to get access to this feature. This will enable you to check stock availability, current pricing and if wanted place your orders directly.
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201507/04/2015
|
|
Aftermarket Europe
Newsletter 02/2015 |
|
| | | | |
Dana
expands its Spicer® Technology Line:
Volvo Interaxle Range
The Dana
Aftermarket Group Europe will add new Spicer® driveshafts to its
growing product collection for Commercial Vehicle - Volvo Interaxles
applications.
These
technologies will be available starting in March through our European
distribution center in Györ.
|
Dana
Aftermarket showcases Spicer® brand at Automechanika Istanbul 2015
For the
first time, Dana is showcasing Spicer® aftermarket products at
Automechanika Istanbul, Eurasia’s leading OEM and aftermarket event.
|
 |
Coming Soon:
Customer Web Portal Access to Gyor DC
To be rolled out in April / May will be the Web Portal access to the
Gyor stocks.
This will enable customers to check pricing / availability of parts and
ultimately to place orders directly.
Your account manager will be in contact soon to discuss this.
|
|
To read
more about our previous range additions including Mercedes ML, Renault Master
(Vauxhall Movano), NK Series, Tubing, Nissan please visit ds.spicernews.com/list.asp |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201522/01/2015
 |
|
Aftermarket Europe
Newsletter 01/2015 |
|
| | | | |
Spicer® Product Range Expansion:
Mercedes – Light Vehicle ML
Effective from January 2015, the Dana Aftermarket
Group Europe is pleased to announce the expansion
of our Driveshaft product
range with the addition of
Spicer Mercedes ML Vito Series for Light Vehicle
Applications in our European Distribution Center
in Györ.
|
 |
Spicer® Product Range
Expansion: NK-Series
Effective from December 2014, the Dana Aftermarket Group Europe is
pleased to announce the expansion of our Driveshaft product range with the
addition of Spicer NK Series 300, 400 and 500 by Spicer
Nordiska Kardan for
Commercial Vehicle Applications
in our European Distribution Center in Györ.
|
 |
New tubing available from Györ
We are pleased to bring to you our
revised and improved quality approved driveshaft tubing range.
All tubing will
now be priced per meter, sold and shipped in multiples of full bar lengths (@ 6
meters*).
A cutting service is available for a
small charge if required.**
All tubing (subject to availability)
will normally be available for shipment 2 weeks after receipt of order, tubing
will be dispatched from our Györ distribution center so can be consolidated
with any other materials being shipped at the same time, thus avoiding
additional transportation charges wherever possible.
*Standard bar lengths may vary
± 10% will be charged as 6 x 1 meter
**A bar length may be cut only 1 or 2 times so we
can ship in 2 meter or
3 meter lengths, all tube still have
to be ordered in multiples of 6 meters
Please talk to your account manager for further
information
and pricing.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 04/201411/12/2014
|
|
Aftermarket Europe
Newsletter 04/2014 |
|
| | | | |
Spicer® Product Range
Expansion: NK-Series
Effective from December 2014, the Dana Aftermarket Group Europe is
pleased to announce the expansion of our Driveshaft product range with the
addition of Spicer NK Series 300, 400 and 500 by Spicer
Nordiska Kardan for
Commercial Vehicle Applications
in our European Distribution Center in Györ.
|
|
New tubing available from Györ
We are pleased to bring to you our
revised and improved quality approved driveshaft tubing range.
All tubing will
now be priced per meter, sold and shipped in multiples of full bar lengths (@ 6
meters*).
A cutting service is available for a
small charge if required.**
All tubing (subject to availability)
will normally be available for shipment 2 weeks after receipt of order, tubing
will be dispatched from our Györ distribution center so can be consolidated
with any other materials being shipped at the same time, thus avoiding
additional transportation charges wherever possible.
*Standard bar lengths may vary
± 10% will be charged as 6 x 1 meter
**A bar length may be cut only 1 or 2 times so we
can ship in 2 meter or
3 meter lengths, all tube still have
to be ordered in multiples of 6 meters
Please talk to your account manager for further
information
and pricing.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201406/11/2014
|
|
Aftermarket Europe
Newsletter 03/2014 |
|
| | | | |
Spicer® Product Range
Expansion: Renault
Effective from October 2014, the Dana Aftermarket
Group Europe is pleased to announce the expansion to our Driveshaft product
range with the addition of a range of Light Duty Driveshaft
for light
commercial vehicle applications in our European Distribution Center in Györ.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
|
New Spicer® Aftermarket Brochure
With more than 110 years of experience, Dana
continuously develops new
designs, materials,
and processes for Spicer products
to provide
more power,
greater efficiency, and better
overall performance.
|
 |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Newsletter 02/201411/09/2014 | | | | | |
Dana Aftermarket launches online Spicer® product catalog at Automechanika 2014
Dana Holding Corporation is launching a new online Spicer® product catalog featuring its extensive off-highway front axle portfolio consisting of 35,000 parts, including 5,000 axles and driveshaft products.
|
|
Spicer® Product Range Expansion
Effective from September 2014, the Dana Aftermarket Group Europe is pleased to announce the expansion to its driveshaft product range with the addition of a range of Light Duty Driveshaft for automotive and light commercial vehicle applications through the European distribution center in Györ.
|
Automechanika
Frankfurt
16. – 20. Sept. 2014
Visit us in hall 5.0, stand D54
|
|
| |
|
| | |
Spicer Newsletter 01/201406/05/2014 | | | | | |
New
Aftermarket Packaging Design
Please click on the play button to watch a 3D
view of the current packaging design.
|
|
Dana Aftermarket introduces Online Spicer® Merchandise
Shop for European Customers
Popularity of online shopping continues to grow worldwide and Dana is
expanding its virtual offerings
to its European aftermarket customers with the
launch of a new online Spicer® merchandise store, www.spicershop.com.
|
|
Dubai – Frankfurt
Meet Dana Aftermarket Group at
the Automechanika
Dana is putting on two different
presentations at
the 2014 Automechanika, the international trade
fair for the
automotive industry.
|
|
| |
|
| | |
Off-Highway: Axle and Transmission Spicer Aftermarket Europe Newsletter 04/201509/12/2015
 |
|
Aftermarket Europe
Newsletter 04/2015 |
|
| | | | |
Dana Aftermarket featuring Spicer®, Victor Reinz® solutions at Automechanika Jeddah 2016
Dana is showcasing its Spicer® and Victor Reinz® aftermarket products at the inaugural Automechanika Jeddah 2016, the latest automotive trade show in Saudi Arabia. To extend its technology reach and develop stronger customer relationships in the Middle Eastern market, Dana will be exhibiting a range of innovative Spicer® and Victor Reinz® technologies, including driveline and sealing solutions for off-highway, commercial, and light vehicles.
|
|
Manitou Vibration Dampening Driveshaft’s
For Telehandlers
Spicer® is pleased to launch an interchangeable
shaft solution for Mantiou machinery. All materials
are equal to OEM performance.
|
 |
Complete
Axle and Transmission Program in Gyor
Based
on the continuous need to improve performance and deliveries to our customers,
we are pleased to announce that we are stocking complete axles and
transmissions in our Gyor distribution center.
|
Spicer® Product Range Expansion:
JCB range and complete shafts and components
Effective from July, the Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer JCB interchangeable driveshafts, for Off-Highway applications
|
.gif) |
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201515/09/2015
|
|
Aftermarket Europe
Newsletter 03/2015 |
|
| | | | |
Up to
Date: Transmission Models
New
program with 1.400 models and
9.500 part numbers now available at
www.spicerparts.com/online-catalog.
Not
yet registered?
Please contact your sales representative
and register for your
account.
|
|
Complete
Axle and Transmission Program in Gyor
Based
on the continuous need to improve performance and deliveries to our customers,
we are pleased to announce that we are stocking complete axles and
transmissions in our Gyor distribution center.
|
Now Available at Gyor
Distribution Center:
|
Online Spicer® Merchandise Shop:
New Stock available
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201507/04/2015
|
|
Aftermarket Europe
Newsletter 02/2015 |
|
| | | | |
Dana
Aftermarket announces enhanced Spicer® online catalog
Dana has announced that the online Spicer® catalog now features a cross reference function, allowing customers to search the extensive offhighway and commercial-vehicle driveline portfolio consisting of nearly 40,000 parts.
|
Dana
Aftermarket showcases Spicer® brand at Automechanika Istanbul 2015
For the first time, Dana is showcasing Spicer® aftermarket
products at Automechanika Istanbul, Eurasia’s leading OEM and aftermarket
event.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201516/02/2015
|
|
Aftermarket Europe
Newsletter 01/2015 |
|
| | | | |
Multipacking – Dana Distribution
Center Györ
Dana
Aftermarket Group Europe has launched a new Spicer® multipacking
strategy for its Györ Distribution Center in Hungary, with all part numbers
included in the link below packaged by 10 pieces and/or rounded to multiples of
10 pieces. Starting on Feb. 16, all new orders will be packaged utilizing the
updated system, and parts will continue to be invoiced at current unit prices.
Customers are encouraged to align their ordering practices with the new packing
method and to contact its sales account manager or customer service
representative with any questions or concerns.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
.jpg)
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Newsletter 02/201411/09/2014 | | | | | |
Dana Aftermarket launches online Spicer® product catalog at Automechanika 2014
Dana Holding Corporation is launching a new online Spicer® product catalog featuring its extensive off-highway front axle portfolio consisting of 35,000 parts, including 5,000 axles and driveshaft products.
|
|
Available soon
Off-Highway/Agriculture
Steering Components
For All Makes
|
|
Automechanika
Frankfurt
16. – 20. Sept. 2014
Visit us in hall 5.0, stand D54
|
|
| |
|
| | |
Spicer Newsletter 01/201407/01/2014 | | | | | |
Complete Unit’s Stocking Program
Based on the continuous need to improve
performance
and deliveries to our customers,
we are pleased to
announce that we are now
stocking complete axles and transmissions in
both our
Crossville and Gyor DC’s.
|
|
Dana Aftermarket introduces Online Spicer® Merchandise
Shop for European Customers
Popularity of online shopping continues to grow worldwide and Dana is
expanding its virtual offerings
to its European aftermarket customers with the
launch of a new online Spicer® merchandise store, www.spicershop.com.
|
|
Dubai – Frankfurt
Dana exhibits at twice at Automechanika –
the key events for the Automotive Aftermarket.
|
|
| |
|
| | |
Commercial / Light Vehicle: Driveshaft Spicer Aftermarket Europe Newsletter 04/201509/12/2015
|
|
Aftermarket Europe
Newsletter 04/2015 |
|
| | | | |
Dana Aftermarket featuring
Spicer®, Victor Reinz® solutions at Automechanika
Jeddah 2016
Dana is showcasing its
Spicer® and Victor Reinz® aftermarket products at the
inaugural Automechanika Jeddah 2016, the latest automotive trade show in
Saudi Arabia. To extend its technology reach and develop stronger
customer relationships in the Middle Eastern market, Dana will be
exhibiting a range of innovative Spicer® and Victor
Reinz® technologies, including driveline and sealing solutions
for off-highway, commercial, and light vehicles.
|
|
Manitou Vibration Dampening Driveshaft’s
For
Telehandlers
Spicer® is pleased to launch an interchangeable
shaft
solution for Mantiou machinery. All materials
are equal to OEM performance.
|
|
Spicer® Product Range Expansion:
Mercedes – Light Vehicle ML
Effective from January 2015, the Dana Aftermarket
Group Europe is pleased to announce the expansion
of our Driveshaft product range with the addition of
Spicer Mercedes ML Vito Series for Light Vehicle
Applications in our European Distribution Center
in Györ.
|
|
Spicer® Product Range Expansion: NK-Series
Effective from December 2014, the Dana Aftermarket Group Europe is pleased to announce the expansion of our Driveshaft product range with the addition of Spicer NK Series 300, 400 and 500 by Spicer
Nordiska Kardan for Commercial Vehicle Applications
in our European Distribution Center in Györ.
|
|
Dana expands its Spicer® Technology Line:
Volvo Interaxle Range
The Dana Aftermarket Group Europe will add new Spicer® driveshafts to its growing product collection for Commercial Vehicle - Volvo Interaxles applications. These technologies will be available starting in March through our European distribution center in Györ.
|
Spicer® Product Range Expansion:
JCB range and complete shafts and components
Effective from July, the Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer JCB interchangeable driveshafts, for Off-Highway applications
|
Propshaft Quality Tubing
Since we launched our tubing supply at the start of the year, we have analysed the performance so far, In order to improve the accuracy of invoicing the standard bar length has been changed from 6 meters to be 5.8 meters as all tubing is now be priced per meter, sold and shipped in multiples of full bar lengths (@ 5.8 meters*) the unit price you pay remains the same.
A cutting service is still available for a small charge if required.**
All tubing (subject to availability) will normally be available for shipment 2 to 3 weeks after receipt of order, tubing will be dispatched from our Györ distribution centre so can be consolidated with any other materials being shipped at the same time, thus avoiding additional transportation charges wherever possible.
*Standard bar lengths may vary ± 10% will be charged as 5.8 x 1 meter
**A bar length may be cut only 1 or 2 times so we can ship in approximately 2 meter or 3 meter lengths, all tube still have to be ordered in multiples of 5.8 meters
Please talk to your account manager for further information and pricing
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201504/08/2015
|
|
Aftermarket Europe
Newsletter 03/2015 |
|
| | | | |
Spicer® Product Range Expansion:
JCB range and complete shafts and components
Effective from July, the Dana Aftermarket Group Europe is pleased to announce the expansion of our driveshaft product range with the addition of Spicer JCB interchangeable driveshafts, for Off-Highway applications
|
Driveshaft Components Failure Analysis Guide
Component failures can result from improper maintenance, installation, or assembly procedures. This quick reference poster assists service technicians in recognizing some possible component failures. The poster is available at www.spicershop.com.
|
|
Propshaft Quality Tubing
Since we launched our tubing supply at the start of the year, we have analysed the performance so far, In order to improve the accuracy of invoicing the standard bar length has been changed from 6 meters to be 5.8 meters as all tubing is now be priced per meter, sold and shipped in multiples of full bar lengths (@ 5.8 meters*) the unit price you pay remains the same.
A cutting service is still available for a small charge if required.**
All tubing (subject to availability) will normally be available for shipment 2 to 3 weeks after receipt of order, tubing will be dispatched from our Györ distribution centre so can be consolidated with any other materials being shipped at the same time, thus avoiding additional transportation charges wherever possible.
*Standard bar lengths may vary ± 10% will be charged as 5.8 x 1 meter
**A bar length may be cut only 1 or 2 times so we can ship in approximately 2 meter or 3 meter lengths, all tube still have to be ordered in multiples of 5.8 meters
Please talk to your account manager for further information and pricing
|
Customer Web Portal Access to Gyor DC
This can be available now to all customers, please contact your account manager to get access to this feature. This will enable you to check stock availability, current pricing and if wanted place your orders directly.
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clark™, Clark
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 02/201507/04/2015
|
|
Aftermarket Europe
Newsletter 02/2015 |
|
| | | | |
Dana
expands its Spicer® Technology Line:
Volvo Interaxle Range
The Dana
Aftermarket Group Europe will add new Spicer® driveshafts to its
growing product collection for Commercial Vehicle - Volvo Interaxles
applications.
These
technologies will be available starting in March through our European
distribution center in Györ.
|
Dana
Aftermarket showcases Spicer® brand at Automechanika Istanbul 2015
For the
first time, Dana is showcasing Spicer® aftermarket products at
Automechanika Istanbul, Eurasia’s leading OEM and aftermarket event.
|
|
Coming Soon:
Customer Web Portal Access to Gyor DC
To be rolled out in April / May will be the Web Portal access to the
Gyor stocks.
This will enable customers to check pricing / availability of parts and
ultimately to place orders directly.
Your account manager will be in contact soon to discuss this.
|
|
To read
more about our previous range additions including Mercedes ML, Renault Master
(Vauxhall Movano), NK Series, Tubing, Nissan please visit ds.spicernews.com/list.asp |
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 01/201522/01/2015
|
|
Aftermarket Europe
Newsletter 01/2015 |
|
| | | | |
Spicer® Product Range Expansion:
Mercedes – Light Vehicle ML
Effective from January 2015, the Dana Aftermarket
Group Europe is pleased to announce the expansion
of our Driveshaft product
range with the addition of
Spicer Mercedes ML Vito Series for Light Vehicle
Applications in our European Distribution Center
in Györ.
|
|
Spicer® Product Range
Expansion: NK-Series
Effective from December 2014, the Dana Aftermarket Group Europe is
pleased to announce the expansion of our Driveshaft product range with the
addition of Spicer NK Series 300, 400 and 500 by Spicer
Nordiska Kardan for
Commercial Vehicle Applications
in our European Distribution Center in Györ.
|
|
New tubing available from Györ
We are pleased to bring to you our
revised and improved quality approved driveshaft tubing range.
All tubing will
now be priced per meter, sold and shipped in multiples of full bar lengths (@ 6
meters*).
A cutting service is available for a
small charge if required.**
All tubing (subject to availability)
will normally be available for shipment 2 weeks after receipt of order, tubing
will be dispatched from our Györ distribution center so can be consolidated
with any other materials being shipped at the same time, thus avoiding
additional transportation charges wherever possible.
*Standard bar lengths may vary
± 10% will be charged as 6 x 1 meter
**A bar length may be cut only 1 or 2 times so we
can ship in 2 meter or
3 meter lengths, all tube still have
to be ordered in multiples of 6 meters
Please talk to your account manager for further
information
and pricing.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 04/201411/12/2014
|
|
Aftermarket Europe
Newsletter 04/2014 |
|
| | | | |
Spicer® Product Range
Expansion: NK-Series
Effective from December 2014, the Dana Aftermarket Group Europe is
pleased to announce the expansion of our Driveshaft product range with the
addition of Spicer NK Series 300, 400 and 500 by Spicer
Nordiska Kardan for
Commercial Vehicle Applications
in our European Distribution Center in Györ.
|
|
New tubing available from Györ
We are pleased to bring to you our
revised and improved quality approved driveshaft tubing range.
All tubing will
now be priced per meter, sold and shipped in multiples of full bar lengths (@ 6
meters*).
A cutting service is available for a
small charge if required.**
All tubing (subject to availability)
will normally be available for shipment 2 weeks after receipt of order, tubing
will be dispatched from our Györ distribution center so can be consolidated
with any other materials being shipped at the same time, thus avoiding
additional transportation charges wherever possible.
*Standard bar lengths may vary
± 10% will be charged as 6 x 1 meter
**A bar length may be cut only 1 or 2 times so we
can ship in 2 meter or
3 meter lengths, all tube still have
to be ordered in multiples of 6 meters
Please talk to your account manager for further
information
and pricing.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Aftermarket Europe Newsletter 03/201406/11/2014
|
|
Aftermarket Europe
Newsletter 03/2014 |
|
| | | | |
Spicer® Product Range
Expansion: Renault
Effective from October 2014, the Dana Aftermarket
Group Europe is pleased to announce the expansion to our Driveshaft product
range with the addition of a range of Light Duty Driveshaft
for light
commercial vehicle applications in our European Distribution Center in Györ.
|
In the
factory, on the road, and now online
Dana
recently launched a new online Spicer® product catalog featuring
the
extensive off-highway front axle portfolio consisting of 35,000 parts,
including 5,000 axles
and driveshaft products.
|
|
New Spicer® Aftermarket Brochure
With more than 110 years of experience, Dana
continuously develops new
designs, materials,
and processes for Spicer products
to provide
more power,
greater efficiency, and better
overall performance.
|
|
|
Genuine
Spicer® drivetrain products are
manufactured to the same high standards as
original
equipment (OE), because they are OE parts. When a part is
replaced
with a
Spicer product, you receive the durability you know with the
quality and
performance you expect.
|
Dana
manufactures Spicer driveshafts, axles, transmission parts,
and related
components for light-vehicle, commercial vehicle,
off-highway,
military, industrial, and performance applications. This
product line includes
driveshafts formerly branded as
GWB™ and
Italcardano™ while legacy axle/ transmission
marques include Clarke™, Clarke
Hurth™, Comaxle™, Sige, and
Kirkstall™. |
| |
|
| | |
Spicer Newsletter 02/201411/09/2014 | | | | | |
Dana Aftermarket launches online Spicer® product catalog at Automechanika 2014
Dana Holding Corporation is launching a new online Spicer® product catalog featuring its extensive off-highway front axle portfolio consisting of 35,000 parts, including 5,000 axles and driveshaft products.
|
|
Spicer® Product Range Expansion
Effective from September 2014, the Dana Aftermarket Group Europe is pleased to announce the expansion to its driveshaft product range with the addition of a range of Light Duty Driveshaft for automotive and light commercial vehicle applications through the European distribution center in Györ.
|
Automechanika
Frankfurt
16. – 20. Sept. 2014
Visit us in hall 5.0, stand D54
|
|
| |
|
| | |
Spicer Newsletter 01/201406/05/2014 | | | | | |
New
Aftermarket Packaging Design
Please click on the play button to watch a 3D
view of the current packaging design.
|
|
Dana Aftermarket introduces Online Spicer® Merchandise
Shop for European Customers
Popularity of online shopping continues to grow worldwide and Dana is
expanding its virtual offerings
to its European aftermarket customers with the
launch of a new online Spicer® merchandise store, www.spicershop.com.
|
|
Dubai – Frankfurt
Meet Dana Aftermarket Group at
the Automechanika
Dana is putting on two different
presentations at
the 2014 Automechanika, the international trade
fair for the
automotive industry.
|
|
| |
|
| | |
Off-Highway: Axle and Transmission
|